STAINLESS STEEL (Back to Our Services)

Following are two of the stainless steel materials that we use:

Parts manufactured from SS-304NI-30 stainless steel. This material has the following characteristics:

Minimum Yield Strength:              30,000psi

Typical Ultimate Strength:           43,000psi

Typical Hardness:                    61 HRB

Typical Density:                     6.4g/cc

Typical Young's Modulus:             15.5 X 10^6psi

Other Applications
This material finds a wide usage in medium strength structural applications. Material in this catagory can be used in applications where corrosion due to rust is of importance.

Parts manufactured from SS-316NI-25 stainless steel. This material has the following characteristics:

Minimum Yield Strength:              25,000psi

Typical Ultimate Strength:           41,000psi

Typical Hardness:                    59 HRB

Typical Density:                     6.4g/cc

Typical Young's Modulus:             15.5 X 10^6psi

Other Applications
This material finds a wide usage in medium strength structural applications. Material in this catagory can be used in applications where corrosion due to rust is of very high importance.

The MPIF Standard 35 sections are reprinted by permission of the Metal Powder Industries Federation. The complete work is available through MPIF, 105 College Road East, Princeton, NJ 08540-6692
Tel. (609) 452-7700